Category
CJ-380
直落式(立式)全自動繞線機-四工位Vertical Auto Four Station Winding Machine
適用於：一般家用電器、冰箱、空調器等壓縮機類。
- 家用電器電機的線圈繞制。
- 可單機工作也可連線配套，和目前傳統式繞線機相比，自動化程度高、效率提高倍數。
- 採用氣缸、四軸交流伺服系統、可編程PLC相互配合，能方便更改高低速、匝數等參數，並且有動態匝數、實繞匝數、設定匝數、故障原因位置自檢顯示等功能。
- 機器採用10寸超大彩色觸控式螢幕，操作便利，保存參數50組。
- 本機採用四工位雙繞頭同時作業，動換工位旋轉盤，特制繞線模具位置自動感測不到位裝配，以防止模具損壞。
- Avaliable for compressor motor of household electric appliance, freezer and air conditioner.
- Workable for single machine running or machine to machine networks. Compare with traditional winding machine, this machine is fully automatic and highly efficiency.
- Installed air cylinder and four spindles AC servo system; coordinating with PLC programme. Easy to change fast/slow speed and turns ratio etc., Auto display on dynamic turns ratio, winding turns ratio, turns ratio set up and breakdown status etc.,
- 10.1" big and colorful touch screen monitor; easy to operate and keeping 50 sets of record in memory.
- Automatic transfer table feeding. Sensors on winding plate to make sure the part loaded completely and to avert mould damaged.
|
主軸轉速：2400 rpm Spindle rpm: 2400rpm |
適用線徑：0.3-1.2mm Wire dia: 0.3-1.2mm |
電源：三相 380V 50/60Hz Power supply: 3Phase 380V 50/60Hz |
|
定子內徑：40-120mm Stator inner dia: 40-120mm |
適用線圈段數：6 Coil section: 6 |
功率：7KW Power: 7KW |
|
定子積厚：25-120mm Stator thickness: 25-120mm |
電機極數：2 & 4 & 6 Pole of electric motor: 2&4&6 |
氣壓：0.5-1.0 mpa Air pressure: 0.5-1.0 mpa |
|
機械重量：1560kgs Machine weight: 1560kgs |
機械尺寸(長x寬x高)：2200x850x2400mm Machine volume(LxWxH): 2200x850x2400mm |
|